Loading... Please wait...

Our Newsletter

USAutomatic Ranger Control Board

  • usautomatic ranger control board
1.00 LBS

Product Description

USAutomatic Ranger Control Board

The Ranger gate opener has the limit settings on the control board. USAutomatic control board for the ranger 500 gate opener has a low voltage mother board. This ranger control board is made for solar power gates. The ranger control board has a 3-year warranty. Lighting stricks are not covered under warrantry. CB Part# 500500


Accessories wire to the J2 connector. Insert wire and tighten screw. J2 pin functions are listed below. 

  • J2 pin 1  +12 VDC output for any accessory power needed (100 ma max). 
  • J2 pin 2  Ground connection for any accessory item. 
  • J2 pin 3   Receiver input (connect N/O from device here) (Logic is move, stop, reverse) 
  • J2 pin 4   Solenoid Lock Power output (+12 VDC only) connect solenoid lock power lead here. (750 ma)
  • J2 pin 5   Photo Eye Power output (+12 VDC only) connect photo eye power lead here. 
  • J2 pin 6   Mag lock power +12 vdc lock only (750 ma max) J2 pin 7   Secondary entrapment device input (N/O connection). 
  • J2 pin 8   Optional relay N/O normally open 
  • J2 pin 9   Open / Free Exit sensor input for opening the gate only (N/O connection)
  • J2 pin 10  Under gate loop / Shadow loop (Connect N/O from device here)
  • J2 pin 11  Safety reversing input (Photo eye, loop connect N/O from device here) 
  • J2 pin 12  Optional relay common 
  • J2 pin 13  Optional relay N/C normally closed contact

Warranty Information

3-year warranty

Find Similar Products by Category

Write your own product review

Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!

Add to Wish List

Click the button below to add the USAutomatic Ranger Control Board to your wish list.

You Recently Viewed...